Money back Guarantee
on all orders
Free Shipping
On orders over $200
Welcome to Ultimate Hobbies
Welcome to Ultimate Hobbies

RocHobby F-16 Falcon 64mm EDF Jet PNP - ROC003P

RocHobby F-16 Falcon 64mm EDF Jet PNP - ROC003P Zoom

RocHobby F-16 Falcon 64mm EDF Jet PNP - ROC003P

Be the first to review this product



RocHobby F-16 Falcon 64mm EDF Jet PNP - ROC003P

Availability: In stock

Product Description


    The RocHobby F-16 Falcon is a fun to fly, predictable EDF jet built with impressive scale detail. This airframe is powerful and maneuverable, but has very "floaty" flight characteristics and is easy to land. The brushless EDF power system puts out 850g of thrust, while the plane has a flying weight of 575g, making this EDF jet a blast to fly. With nylon hinges, a brushless motor, 50A ESC, and 5 micro servos already in place, this Receiver-Ready replica can be turning heads and drawing attention with little effort. All you need is your receiver and battery of choice! Like all RocHobby planes, this one is manufactured by FMS. 

    Speed Tip - for those who love speed
    If you want to go fast, do not install the drop tanks and under wing missiles. You can also remove the landing gear and related parts. The speed and performance difference is amazing. While not unlimited vertical, this jet has more vertical than most any stock jet in this configuration. Also, use the outermost hole in the aileron servo horn and inner most hole in the aileron control horn for more maneuverability and a fast roll rate. There is enough power for super easy hand launches in this configuration and if you like a fast and maneuverable belly lander, try this configuration. 

    The F-16 power plant has been upgraded from a 4600Kv motor to a slightly larger diameter and higher revving 2627-5100Kv motor. In addition the ESC has been upgraded from a 35A to a 50A ESC. RocHobby recommends using a 2200 3S LiPo pack in the EDF jet. The foam has been upgraded from EPS to a more durable EPO. While EPO is never as smooth as EPS, the smoothness of this EPO is very impressive. Lastly, the two elevator servos have been separated and now use a Y adapter for connection to a single elevator channel. RocHobby recommends removing the Y cable and plugging each elevator servo into a separate channel (may require servo extensions depending on your RX location). This allows each half of the elevator to be separately subtrimmed and perfectly centered for even throws. This setup allows more precise control in loops, immelmann turns, rolls, and inverted flight. 


    • 850g of thrust from the 5100Kv brushless motor, flying weight 575g
    • Separate servo for front wheel steering
    • Nylon pinned hinges on all control surfaces
    • Smooth and predictable performance
    • Highly detailed scale design
    • Brushless motor, ESC and 5 micro servos installed

    Wingspan: 730mm / 28.7in 
    Length: 1100mm / 43.3in 
    Flying Weight: 575g 
    Power System: Brushless 2627-5100Kv 
    Speed Control: 50A, Internal 4A SBEC, T Connector 
    Propeller / EDF: 64mm EDF 
    Servos: 9g×5 
    Landing Gear: Fixed 
    Required Battery: 11.1V 2200mAh 30C 3 cell LiPo 
    Required Radio: 4 Channel 
    Rudder: No - use channel to steer front wheel 
    Flaps: No 
    Ailerons: Yes 
    Lights: No 
    Hinge Type: Nylon pinned hinges on all control surfaces 
    Material: EPO Foam 

    Needed to Complete: 

    • Epoxy - Epoxy is no longer included by FMS. FMS includes contact cement and we highly recommend epoxy for wings and stabs.
    • 4-6 Channel Radio
    • 4-6 Channel Receiver
    • 3 Cell 11.1V 2200 mAh Lipo Battery - EPR22003
    • Lipo Battery Charger
Additional Information

    Additional Information

    SKU ROC003P
    Battery cell 3 cell
    Manufacturer FMS
    Color No

    Write Your Own Review

    You're reviewing: RocHobby F-16 Falcon 64mm EDF Jet PNP - ROC003P

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab